Fittings All for the furniture making y 01 02 03 04 05 06 08 10 11 14 13 12 09 07
Welcome to the Démos catalogue
Strong; Hawa Sevroll; Hettich Terno Sisco system Strong; Hallemaier; ASA Bachmann Legrand Strong Knapp Italiana Ferramenta Hettich Tulip Marella Hettich Strong Kesseböhmer Vibo Strong Scilm Hettich Tente Strong Franke Blanco Cordia Rehau Twin Strong Lehmann BBP Strong Franke; Blanco Agoform Ritter Strong Blum Hettich Strong Blum Hettich Strong Kesseböhmer Blum 01 02 03 04 05 06 08 10 11 14 13 12 09 07 kitchen wire systems legs, glides and castors lifting and folding mechanisms furniture slides interior equipment for furniture and drawers lighting and electrification of furniture fittings for sliding and folding doors, fittings for offices, home offices, student rooms kitchen sinks, kitchen taps, kitchen hoods, waste disposers aluminium frames, tambour doors handles, handle profiles, hooks connecting fittings, grilles and vents fittings for interior doors furniture hinges Hinges for horizontal and vertical opening of solid, glass doors and aluminium frame doors. Lifting and folding mechanisms for cabinets, beds and shoe racks. Fittings enabling the movement and partial construction of drawers. Fittings for the movement (sliding or folding) of doors of built-in or free-standing wardrobes and doors covering interior passages. All materials for lighting not only furniture, and in addition electrical, data and USB sockets in all sizes and combinations. Materials for the construction or hanging of furniture, building of terraces or cubicles. Handles, knobs, grip profiles, hooks for furniture doors. Inserts for storing items in kitchen, bathroom and wardrobe and walk-in closet drawers. Full wire and metal functional equipment for kitchens and wardrobes / walk-in closets. (larder units, corner solutions, etc.) Table, adjustable (plinth) and furniture legs, knock-in and adhesive glides and various types of furniture castors. Stainless steel, granite and ceramic sinks, various kitchen taps, cooker hoods and waste disposers under the sink. Materials for quick construction of doors with glass infill for cabinets or tambour doors. Handles, locks, door stops, pull handles for fitting interior doors. Fittings for the manufacture and equipment of offices, home offices, student rooms and study rooms. 01 02 03 04 05 06 08 10 11 14 13 12 09 07
! @ # StrongMax Legrabox AvanTech You StrongBox Antaro, Merivobox ArciTech, Atira StrongRide Movento, Tandem Actro, Quadro StrongMini Strong Blum Hettich Strong Blum Hettich Strong Blum Hettich Strong 03.6 03.73 03.107 03.15 03.45 ; 03.62 03.111; 03.116 03.25 03.99 03.121 03.13 K01 K02 K03 K04 K05 K07 AL K12 K01 K02 K03 K04 K05 K07 AL K12 K01 K02 K03 K04 K05 K07 AL K12 AL StrongRoll 03.16 03.17 03.18 03.20 03.21 03.29 03.25 03.26 03.27 03.28 03.41 S5: 03.31 ; S3: 03.40 03.33 03.34 03.39 03.35 03.35 03.37 10.29 10.63 10.12; 10.17 10.5 10.16 10.31 10.26 10.55 10.39 10.40 10.71 10.19 Strong Hettich Strong Italiana Ferramenta Hettich Strong Spax ! @ # On the next page you will find two types of contents: if the chapter contains products we offer from multiple suppliers (Strong, Blum, Hettich, Vibo, etc.), you will find a comparison contents. In chapters where this is not the case, a standard contents page referring to individual products is provided at the beginning. There is also a contents page for individual products, with a link to it at the beginning of the comparison contents. At the beginning of each, chapter there is an overview of services we offer beyond the sale of fittings (for example samples, configurators, material supplies, etc.). In the catalogue you will find all the information you need when selecting suitable fittings. Other technical information, certificates and assembly instructions can be found at www.demos24plus.com How to use the printed catalogue? The catalogue contains 14 chapters divided by the type of fittings and the situation they address. The colour coding and a small icon in the tab on the side of the catalogue will help you navigate. On the inside of the cover there is a complete overview of chapters with a description of what goods you can find in them. MATERIAL FOR DOOR PRODUCTION The material for the door and cabinet body together with the fittings? There's nothing easier than ordering both from us. ADVISORY SERVICE Not sure how to choose or assemble the fittings? Call +420 556 684 310 or email export@demos-trade.com and we will be happy to help you. DELIVERY TO YOUR DOOR All orders will be delivered to your hands within 72 hours. PORTAL A customer portal for purchasing, order overview, job submission, formatting, and status tracking. All in one place: stock availability, your prices, and much more. COMPLETE CABINET BODIES Do you have a great project but are struggling with time, workshop space, or other obstacles? Don't lose heart! We offer you our premises, machinery, and time — we will manufacture the cabinet bodies you need to your exact specifications. SAMPLE ROOM DISPLAYS Representatives of wire systems need plenty of space to display their products — and we have it. Come and see for yourself, or send your customers to our sample room. We will walk them through everything and help them make the right choice. furniture hinges slide system with thin double side panel with double side panel concealed slide system with single side panel roll runner slides with side StrongBox, height 86 mm StrongBox, height 140 mm StrongBox, height 204 mm StrongBox inner solutions StrongBox accessories concealed slides ball bearing slides StrongRide UNI StrongRide 3D synchro StrongRide 3D StrongRide 2D for handleless opening StrongRide 2D with soft closing (45 kg) with soft closing and higher load capacity (75 kg) for handleless opening for handleless opening with damping without soft closing with load capacity of up to 120 kg without soft closing (45 kg) mini slides and keyboard slides with double side panel eccentric fittings screws and confirmat screws shelf supports screw and confirmat screw cover caps connecting bolts shelf connectors drill-in nuts shelf brackets
01 02 03 04 05 06 08 10 11 14 13 12 09 07 HUNGARY CZECH REPUBLIC SLOVAKIA POLAND Havlíčkův Brod Hra dec Králové Plzeň Liberec Litoměřice České Budějovice Třebotov Nitra Zvolen Veľká Lomnica Velká Bystřice Košice Trenčín Brno Opava OSTRAVA KATOWICE PRAHA Michalovce Bratislava BUDAPEST ŽILINA Uh. Hradiště 01 02 03 Démos trade For base thickness 18 mm length (mm) grey white black 300 503038 503070 350 503039 503071 × 400 503040 503072 × 450 503041 503073 503096 500 503042 503074 503097 550 503043 503075 × 600 503044 503076 × 650 503045 503077 × The magnifying glass icon in the upper right corner of the screen will speed up your search for individual products. Clicking on any code will open the portal and you can order the item directly. You can also browse it on your phone. The coloured areas with icons on the right side of the catalogue will open the contents of the given chapter when clicked. While browsing, you can zoom in, print individual pages, download it, send it to someone as a link and it will never, NEVER get lost or damaged. Clicking on the page number in the contents will automatically open the page. Key links and contacts: Everything is placed on the back of the cover together with a map of our branches. How to use the online catalogue? It looks the same as the printed version, so you can easily find your way around it. It also contains many tools that make navigation and, above all, searching easier. 01 02 03 04 05 06 08 10 11 14 13 12 09 07
01.11
01.2 01 MATERIAL FOR DOOR PRODUCTION The material for the door and cabinet body together with the fittings? There's nothing easier than ordering both from us. ADVISORY SERVICE Not sure how to choose or assemble the fittings? Call +420 556 684 310 or email export@demos-trade.com and we will be happy to help you. DELIVERY TO YOUR DOOR All orders will be delivered to your hands within 72 hours. PORTAL A customer portal for purchasing, order overview, job submission, formatting, and status tracking. All in one place: stock availability, your prices, and much more. COMPLETE CABINET BODIES Do you have a great project but are struggling with time, workshop space, or other obstacles? Don't lose heart! We offer you our premises, machinery, and time — we will manufacture the cabinet bodies you need to your exact specifications. SAMPLE ROOM DISPLAYS Representatives of wire systems need plenty of space to display their products — and we have it. Come and see for yourself, or send your customers to our sample room. We will walk them through everything and help them make the right choice. furniture hinges 01 02 03 04 05 06 08 10 11 14 13 12 09 07
01.3 Strong Blum Hettich Strong Blum Hettich Strong Blum Hettich 01.8; 01.11 01.23; 01.27; 01.43 01.49; 01.51; 01.63 Strong Blum Hettich 01.15 01.43 01.69 Blum Hettich 01.33 01.51 Strong Blum Hettich 01.5 01.19 01.45 Strong Blum Hettich 01.8; 01.11 01.23; 01.27; 01.43 01.49; 01.51; 01.63 Strong Blum Hettich 01.15 01.43 01.69 Blum Hettich 01.33 01.51 Strong Blum Hettich 01.9; 01.12 01.23; 01.27; 01.43 01.49; 01.51; 01.63 Strong Blum Hettich 01.15 01.43 01.55 Blum Hettich 01.33 01.51 01.9; 01.13 01.40 01.55 01.13 01.40 01.55 K01 K02 K03 K04 K05 AL K12 AL AL AL contents FURNITURE HINGES The catalogue is available for download at www.demos-trade.com clip-on clip-on clip-on slide-on black clip-on slide-on black clip-on slide-on black clip-on clip-on Contents by brand: inset half overlay full overlay
01.4 12345 12345 01 Strong Blum Hettich Strong Blum Hettich Strong Blum Hettich Blum Hettich Blum Hettich Strong Blum Blum Hettich Strong Blum Hettich Strong Blum Hettich 01.10; 01.13 01.24 01.55 01.9; 01.12 01.28 01.9; 01.12 01.34 01.53 01.29 01.66 01.25 01.52 01.27 01.52; 01.63 01.14 01.31 01.68 01.10 01.30 01.55 01.7; 01.17 01.36 01.57; 01.62 K01 K02 K03 K04 K05 AL K12 AL AL AL AL AL AL AL AL FURNITURE HINGES contents Item in stock Item on demand clip-on clip-on clip-on slide-on clip-on hinges for thin aluminium frames mechanisms for handleless opening hinges for glass doors hinges for thick doors clip-on hinges for thin materials hinge for cabinet with built-in fridge 165° 90° (blind corner) 155°/165° (no overlay into the interior of the cabinet) clip-on clip-on 01 02 03 04 05 06 08 10 11 14 13 12 09 07
01.5 S5: 01.8; S3: 01.11 S5: 01.8; S3: 01.11 S3: 01.11 S5: 01.8; S3: 01.11 S5: 01.8; S3: 01.11 S3: 01.11 S5: 01.9; S3: 01.12 S5: 01.9; S3: 01.12 S3: 01.12 S3: 01.15 S3: 01.15 S3: 01.15 S3: 01.15 S3: 01.13 S3: 01.13 S3: 01.13 S5: 01.9; S3: 01.13 S3: 01.13 contents FURNITURE HINGES The catalogue is available for download at www.demos-trade.com with soft closing without soft closing with soft closing without soft closing without spring with soft closing without soft closing without spring with soft closing without soft closing without spring with soft closing without soft closing without soft closing without soft closing with soft closing without soft closing without spring 45° 30° full overlay half overlay inset slide-on clip-on clip-on clip-on slide-on slide-on
01.6 12345 12345 01 S5: 01.10; S3: 01.13 S3: 01.13 S3: 01.13 S3: 01.14 S5: 01.9; S3: 01.12 S3: 01.12 S3: 01.12 S3: 01.16 S5: 01.9; S3: 01.12 01.10 01.7 01.17 FURNITURE HINGES contents Item in stock Item on demand with soft closing with soft closing without soft closing without spring with soft closing without soft closing without spring with soft closing with soft closing without soft closing without spring without soft closing hinges for thin aluminium frames mechanisms for handleless opening 155°/165° (full overlay, half overlay and inset) 90° (blind corner) hinges for glass doors 155° (no overlay into the interior of the cabinet) Mini hinges 01 02 03 04 05 06 08 10 11 14 13 12 09 07
01.7 www.demos‑trade.com 513983 513984 513985 506462 506463 506464 159 14 213 56 FURNITURE HINGES – handleless opening, – soft closing, – all in combination with spring hinges (without damping) code model description light 2 hinges with spring and door weighing 4-6 kg standard 4 hinges with spring and door weighing 12-17 kg heavy 5 hinges with spring and door weighing 17-22 kg code model description light 2 hinges with spring and door weighing 4-6 kg standard 4 hinges with spring and door weighing 12-17 kg heavy 5 hinges with spring and door weighing 17-22 kg White Light grey The product has received TÜV, SGS, and UKAS certification for 60 000 cycles. • The door opens by pressing on its surface, ideally as close as possible to the point where the mechanism is located. • The same mechanism dampens the door movement upon closing. • For optimal activation, the extension of the closed mechanism can be adjusted by +5 mm. • Easy assembly with 4 screws. Assembling as close to the centre of the door as possible, at the following distances: – for cabinet bodies up to 450 mm in width — as far from the hinges as possible, – for cabinet bodies wider than 450 mm (max. 600 mm) — 450 mm from the hinges. • The mechanism is then covered with a cover cap for a clean finish. • Thanks to its dimensions, it does not take up much space inside the cabinet. Smootis StrongHinges mechanism for handleless opening with soft closing
01.8 12345 12345 01 92580T 198818 549320 549321 549322 549317 549318 549319 549323 549324 549325 550636 550637 550638 549607 549608 549609 549604 549605 549606 D K 37 H D K 37 H D K 37 H 92581T 198819 127781 405459 37 K D H D=K+11-H D=K+11-H D=K+11-H D=K+1-H FURNITURE HINGES StrongHinges S5 for clipping onto a mounting plate Item in stock Item on demand code description with soft closing without soft closing1] description hinge with soft closing + mounting plate hinge with soft closing + mounting plate H0 screw H0 euro screw H0 screw + cam H0 screw H0 euro screw H0 screw + cam full overlay inset half overlay • possible adjustment D ± 3 mm • min./max. applicable door thickness for the given hinge • min./max. applicable door thickness for the given hinge • possible adjustment D ± 3 mm • min./max. applicable door thickness for the given hinge • possible adjustment D ± 3 mm • min./max. applicable door thickness for the given hinge Full overlay S5 complete sets hinge + mounting plate 1] suitable for use with the 92580T hinge (for small doors) • 110° opening angle Ĺ recommended plates H0: screw with cam 92594T, screw 92590T, with euro screws 92591T, for other plates, see p. 01.10 code description with pre-mounted H0 plate, cover cap and arm code description with H0 plate with cam, cup cover caps and arm, screw 4 pcs • individual sets packed separately in a bag • individual sets packed separately in a bag code description with integrated soft closing without soft closing1] Full overlay – set with mounting plate and cover caps (made of stainless steel) Half overlay 1] suitable for use with the 92581T hinge (for small doors) • 110° opening angle Ĺ recommended plates H0: screw with cam 92594T, screw 92590T, with euro screws 92591T, for other plates, see p. 01.10 Full overlay – set with mounting plates and cover caps 01 02 03 04 05 06 08 10 11 14 13 12 09 07
01.9 www.demos‑trade.com 92582T 198820 37+T T K A H X=37-(K-3) / D=(K-3)-H D=K+6-H A=(6-K)+(H+2) D=K+11-H A=(6-K)+(H-2) 354224 H 4,2 K H D 205543 H K D 37 191109 K A H 37+T T H D K X 45° 92583T StrongHinges S5 for clipping onto a mounting plate FURNITURE HINGES • possible adjustment D ± 3 mm • min./max. applicable door thickness for the given hinge • possible adjustment D ± 5 mm • min./max. applicable door thickness for the given hinge • possible adjustment A is ± 3 mm • min./max. applicable door thickness for the given hinge • possible adjustment A is ± 2 mm • min./max. applicable door thickness for the given hinge • possible adjustment D ± 3 mm • min./max. applicable door thickness for the given hinge Inset code description with integrated soft closing without soft closing1] 1] suitable for use with the 92582T hinge (for small doors) • 110° opening angle Ĺ recommended H2 plates: screw 92592T, with euro screws 92593T, for other plates see p. 01.10 • the doors do not interfere with the interior of the cabinet body at 90° opening angle (they do not interfere with the output path of the inner drawers) Ĺ recommended H0 plates: screw with cam 92594T, screw 92590T, with euro screws 92591T, for other plates see p. 01.10 code description with integrated soft closing Full overlay 155° for cabinets with internal drawers Ĺ recommended H0 plates: screw with cam 92594T, screw 92590T, with euro screws 92591T, for other plates see p. 01.10 code description with integrated soft closing Ĺ recommended H2 plates: screw 92592T, with euro screws 92593T, for other plates see p. 01.10 code description with integrated soft closing Full overlay 165° Inset 165° Full overlay 45° • recommended plates H0: screw with cam 92594T, screw 92590T, with euro screws 92591T Ĺ for other plates, see p. 01.10 code description with integrated soft closing
01.10 12345 12345 01 H D X K 191110 X=20-(K-3) / D=(K-3)-H D=K+11-H 92584T 92594T 92590T 92591T 37 32 4 51 32 37 51 4 397954 92592T 92593T 206011 92596T 92597T FURNITURE HINGES StrongHinges S5 for clipping onto a mounting plate Item in stock Item on demand Straight 90° code description with integrated soft closing • recommended plates H0: screw with cam 92594T, screw 92590T, with euro screws 92591T Ĺ for other plates, see p. 01.10 • possible adjustment D ± 3 mm • min./max. applicable door thickness for the given hinge • possible adjustment D ± 3 mm • min./max. applicable door thickness for the given hinge code description with integrated soft closing • recommended plates H0: screw with cam 92594T, screw 92590T, with euro screws 92591T Ĺ for other plates, see p. 01.10 • 110° opening angle Full overlay for aluminium frames code description with cam, for screw fixing for screw fixing with euro screws code description with cam, for screw fixing for screw fixing with euro screws The cover cap can be printed with any logo. Plates Cover caps H0 H2 H4 code description for screw fixing code description hinge cup cover cap arm cover cap for full overlay hinges • you can have the arm cover cap printed (logo, picture, text...) Ĺ only for hinges from p. 01.13 - 01.15 01 02 03 04 05 06 08 10 11 14 13 12 09 07
01.11 www.demos‑trade.com 350827 350834 387304 350837 387311 350840 350830 350831 350832 37 73,5 K D H 22 T 350832 350828 D=K+10-H 350828 350835 350838 549625 549626 549624 549622 549623 549621 549628 549629 549627 549643 549644 549642 549640 549641 549639 549646 549647 549645 549634 549635 549633 549631 549632 549630 549637 549638 549636 StrongHinges S3 for clipping onto a mounting plate FURNITURE HINGES code description with soft closing, for screw fixing without soft closing, for screw fixing with soft closing, with dowels with diameter 10 mm without spring 1], for screw fixing knock-in, dowel with diameter 10 mm without soft closing, without cam, for screw fixing code description with H0 plate, for screw fixing with H0 plate with euro screws with H0 plate with cam, cup cover caps and arm 1] 1] set includes: – 2 pcs of hinges with pre-mounted plates – 2 pcs of cup cover caps – 2 pcs of hinge arm cover caps – 8 pcs of screws 1] for handleless opening mechanisms see p. 01.23 - 01.24 • 110° opening angle • recommended plates H0: screw with cam 315856, screw 92596, with euro screws 92597 Ĺ for other plates, see p. 01.14 version with dowel Full overlay with cam Full overlay – sets with pre-assembled mounting plate • possible adjustment D ± 4 mm • min./max. applicable door thickness for the given hinge code description with soft closing, for screw fixing without soft closing, for screw fixing without spring 1] , for screw fixing • recommended plates H0: screw with cam 315856, screw 92596, with euro screws 92597 • 110° opening angle Ĺ for other plates, see p. 01.14 Ĺ 1] for handleless opening mechanisms, see p. 01.23 - 01.24 Half overlay with cam description hinge without soft closing hinge with soft closing hinge without spring mounting plate H0 screw pad H0 euro screw pad H0 screw + cam mounting plate H0 screw pad H0 euro screw pad H0 screw + cam mounting plate H0 screw pad H0 euro screw pad H0 screw + cam full overlay inset half overlay S3 complete sets hinge + mounting plate
01.12 12345 12345 01 350829 387310 350836 350839 40 H K A 37 + T 73,5 T A=(6-K)+(H+2) 350850 350851 350849 350852 350853 K D H 60 70 37 5,5 H 90° K A H 78 70 + T 37 + T T K D H 69 70 37 D=K+1-H A=(6-K)+(H+2) D=K+10-H FURNITURE HINGES StrongHinges S3 for clipping onto a mounting plate Item in stock Item on demand version with dowel code description with soft closing, for screw fixing with soft closing, with dowels with diameter 10 mm without soft closing, for screw fixing without spring 1] , for screw fixing • recommended H2 plates: screw with cam 350868, screw 92598, with euro screws 92599 • 110° opening angle Ĺ for other plates, see p. 01.14 Ĺ 1] for handleless opening mechanisms see p. 01.17 - 18 Inset with cam • possible adjustment A is ± 4 mm • min./max. applicable door thickness for the given hinge code description with soft closing code description with soft closing code description with soft closing without soft closing unsprung 1] Half overlay 155° Inset 155° Full overlay 155° for cabinets with internal drawers • recommended plates H0: screw with cam 315856, screw 92596, with euro screws 92597 Ĺ for other plates, see p. 01.14 Ĺ 1] for handleless opening mechanisms see p. 01.17 - 18 • recommended H2 plates: screw with cam 350868, screw 92598, with euro screws 92599 Ĺ for other plates, see p. 01.14 Ĺ 1] for handleless opening mechanisms, see p. 01.17 - 18 • recommended plates H0: screw with cam 315856, screw 92596, with euro screws 92597 Ĺ for other plates, see p. 01.14 Ĺ 1] for handleless opening mechanisms see p. 01.17 - 18 • possible adjustment D ± 4 mm • min./max. applicable door thickness for the given hinge • possible adjustment A is ± 4 mm • min./max. applicable door thickness for the given hinge • possible adjustment D ± 4 mm • min./max. applicable door thickness for the given hinge 01 02 03 04 05 06 08 10 11 14 13 12 09 07
01.13 www.demos‑trade.com 350857 350858 42 D X 70 K 350860 350861 350862 X=20-(K-4) / D=(-H)-1,2 31 H D X 55 K 92590 K T H 37 X=37-(K-3) / D=(K-3)-H X=37-(K-3) / D=(K-4,6)-H 350854 350855 350856 41 H D X 70 K StrongHinges S3 for clipping onto a mounting plate FURNITURE HINGES code description with soft closing without soft closing • recommended plates H0: screw with cam 315856, screw 92596, with euro screws 92597 Ĺ for other plates, see p. 01.14 Ĺ 1] for handleless opening mechanisms, see p. 01.17 - 18 • possible adjustment D ± 4 mm • min./max. applicable door thickness for the given hinge • possible adjustment D ± 4 mm • min./max. applicable door thickness for the given hinge code description with soft closing without soft closing unsprung 1] Straight 90° • recommended plates H0: screw with cam 315856, screw 92596, with euro screws 92597 Ĺ for other plates, see p. 01.14 Ĺ 1] for handleless opening mechanisms, see p. 01.17 - 18 • possible adjustment D ± 4 mm • min./max. applicable door thickness for the given hinge code description without soft closing • recommended H0 plates:, screw with cam 315856, screw 92596, with euro screws 92597 Ĺ for other plates, see p. 01.14 Cranked 135° code description with soft closing without soft closing unsprung 1] • recommended plates H0: screw with cam 315856, screw 92596, with euro screws 92597 Ĺ for other plates, see p. 01.14 Ĺ 1] for handleless opening mechanisms see p. 01.17 - 18 Full overlay 30° Full overlay 45°
01.14 12345 12345 01 315856 92596 361125 92597 350868 92598 361126 92599 350869 350870 350871 198894 198896 198897 198898 198893 FURNITURE HINGES Item in stock Item on demand StrongHinges S3 glass hinges, mounting plates and cover caps code description with cam, for screw fixing for screw fixing for screw fixing with four holes with euro screws code description with cam, for screw fixing for screw fixing for screw fixing with four holes with euro screws code description with cam, for screw fixing for screw fixing with euro screws code description inset hinge for drilled glass, clip-on with soft closing code description material glass hinge cover cap chrome nickel black code description full overlay hinge for drilled glass, clip-on with soft closing H0 H2 H4 Counterpart with cover cap Inset Full overlay 01 02 03 04 05 06 08 10 11 14 13 12 09 07
01.15 www.demos‑trade.com 350844 350843 351855 350847 350848 350845 350846 31 H K D 61,5 37 H 40 A 61,5 37 + T K T 22 H K D 61,5 37 D=K+10-H A=(6-K)+(H+2) D=K+1-H 350872 350875 350873 350876 StrongHinges S3 for sliding onto a plate FURNITURE HINGES code description without soft closing with soft closing1] without soft closing, with pre-mounted euro screws code description without soft closing, H0, for screw fixing without soft closing, H0 with euro screws code description without soft closing code description without soft closing 1] a new solution for soft closing, the hinge can be demounted from the plate • recommended H0 plates: screw 350872, with euro screws 350875 • identical hinge design with version without soft closing Ĺ for other plates, see p. 01.15 • all sets come always with a pre-assembled plate on the hinge • recommended H0 plates: screw 350872, with euro screws 350875 Ĺ for other plates, see p. 01.15 • recommended H2 plates: screw 350873, with euro screws 350876 Ĺ for other plates, see p. 01.15 Full overlay Full overlay – sets Half overlay Inset • possible adjustment D ± 4 mm • min./max. applicable door thickness for the given hinge • possible adjustment A is ± 4 mm • min./max. applicable door thickness for the given hinge • possible adjustment D ± 4 mm • min./max. applicable door thickness for the given hinge H0 H2 code description for screw fixing with euro screws code description for screw fixing with euro screws
01.16 12345 12345 01 K D H 37 92521 92528 92522 H K 37 D A K H T T+37 92523 D=K+9 D=K-2 D=K+1 FURNITURE HINGES StrongHinges S3 mini hinges with plates Item in stock Item on demand • 95° opening angle • maximum door thickness 22 mm • 95° opening angle • maximum door thickness 22 mm • 95° opening angle • maximum door thickness 22 mm Mini inset slide-on Mini half overlay slide-on Mini full overlay slide-on code description without soft closing, including H0 plate code description without soft closing, including H0 plate, for screw fixing without soft closing, including H0 plate with euro screws code description without soft closing, including H0 plate • possible adjustment D is +2 mm / −2 mm • min./max. applicable door thickness for the given hinge • possible adjustment A is +2 mm / −2 mm • min./max. applicable door thickness for the given hinge • possible adjustment D is +2 mm / −2 mm • min./max. applicable door thickness for the given hinge 01 02 03 04 05 06 08 10 11 14 13 12 09 07
www.demos‑trade.com 37 499427 504238 499448 499428 499442 499447 499429 499444 499449 372387 504238 499448 403061 499442 499447 403060 499444 499449 14 499430 372384 504239 499431 499441 499445 499432 499443 499446 37 499433 504238 499448 499434 499442 499447 499435 499444 499449 499436 504238 499448 499437 499442 499447 499438 499444 499449 14 390911 372384 504239 499439 499441 499445 499440 499443 499446 50 14 49,5 ø12 1 ø10 70 37 68,4 ø12 1 ø10 0,6 ø15 Ø3 3 Ø3,5 ø10 14 1 0,6 ø15 Ø3 3 Ø3,5 14 1 0,6 ø15 Ø3 3 Ø3,5 ø10 14 1 FURNITURE HINGES 01.17 type sliding length (mm) force colour pin adapter adapter plate with buffer regular grey white black extra strong grey white black regular grey white black with magnet regular grey white black extra strong grey white black regular grey white black • counterpart for gluing to pins with magnet – 517607 • counterpart for drilling to pins with magnet – 369757 Extension pin drilling and dimensions, 14 mm Extension pin drilling and dimensions, 37 mm Size of counterpart to be adhered Drilling and dimensions of the counterpart for drilling-in handleless opening mechanisms K-Push for drilling-in or with adapter
01.18 12345 12345 01 92985 399709 399708 399710 34 11 11 3 13 5 27 35 3 19 11 125 6 10 84 16 41 8 12 Ø 7 Ø12 Ø10 Ø10 Ø3 Ø5,5 20 10 20 70 37 FURNITURE HINGES handleless opening mechanisms Item in stock Item on demand code description metal + plastic • plastic counterpart can also be purchased separately as 165458 code • suitable for use in combination with springless hinges Mechanism for springless hinges colour white grey colour grey • magnetic PTO mechanism with cabinet body clip Package includes: – PTO mechanism – adapter – 3 screws – counterpart plate for screw fixing – screw with dowel with a diameter of 10 mm (for possible fixing of the counterpart plate) • magnetic PTO mechanism for 10 mm drilling-in hole Package includes: – PTO mechanism – screw with dowel with a diameter of 10 mm (for possible fixing of the counterpart plate) – counterpart plate with M3 tape StrongHinges – pin mechanisms for handleless opening For drilling-in With adapter 01 02 03 04 05 06 08 10 11 14 13 12 09 07
01.19 01.23 01.33 01.24 01.24 01.25 01.27 01.28 contents FURNITURE HINGES The catalogue is available for download at www.demos-trade.com with BLUMOTION with closing spring unsprung TIP-ON with BLUMOTION with closing spring unsprung TIP-ON with BLUMOTION with closing spring with closing spring unsprung TIP-ON with BLUMOTION with closing spring unsprung TIP-ON with BLUMOTION with closing spring unsprung TIP-ON 110° blind corner inset blind corner full overlay 100° 155° zero protrusion thick doors with BLUMOTION with closing spring unsprung TIP-ON ONYX
01.20 12345 12345 01 01.28 01.29 01.29 01.30 01.30 01.31 01.43 FURNITURE HINGES contents Item in stock Item on demand with BLUMOTION with closing spring with closing spring without spring TIP-ON 125° zero protrusion 170° with closing spring folding doors of a corner cabinet with closing spring with closing spring glass doors module with BLUMOTION with closing spring without spring TIP-ON 95° doors with aluminium frames 95° doors with aluminium frames 01 02 03 04 05 06 08 10 11 14 13 12 09 07
01.21 01.32 01.32 01.32 01.25 01.40 01.44 01.36 01.39 contents FURNITURE HINGES The catalogue is available for download at www.demos-trade.com CRISTALLO CRISTALLO glass cases overlapping fronts thin materials angled for built-in fridge TIP-ON mechanisms pistons, adapters, counterparts templates with BLUMOTION with closing spring without spring TIP-ON with BLUMOTION with closing spring without spring TIP-ON with BLUMOTION with closing spring without spring TIP-ON with BLUMOTION with closing spring without spring TIP-ON with BLUMOTION with closing spring
01.22 12345 12345 01 B min. 13 T min. 12,3 45 Ø35 Ø3 9,5 K = 3-7 min. 13 45 Ø35 Ø8 9,5 K = 3-7 () INSERTA 17-22 12-17 6-12 4-6 kg 2500 2 3 4 5 2000 1500 1000 500 0 1] kg FURNITURE HINGES drilling dimensions Item in stock Item on demand Screw-on mounting The number of hinges depends on the weight and height of the door front. B CLIP top BLUMOTION T CLIP top B CLIP top BLUMOTION T CLIP top Inserta assembly / knock-in / Expando n In order to achieve good stability, hinges should be placed as far apart as possible. n The loading and height data refer to a 600 mm wide door. 01 02 03 04 05 06 08 10 11 14 13 12 09 07
01.23 www.demos‑trade.com 12047 71B3550 12064 71B358E 131807 71B3590 12052 71T3550 118142 71T358E 157369 71T3590 226668 70T3550.TL 226669 70T358E.TL 177369 70T3590.TL 12048 71B3650 12065 71B368E 177395 71B3690 12053 71T3650 118143 71T368E 177409 71T3690 226670 70T3650.TL 177372 70T3690.TL 12049 71B3750 12066 71B378E 177398 71B3790 12059 71T3750 118144 71T378E 177411 71T3790 226671 70T3750.TL 177374 70T3790.TL 12048 12049 12047 21,5 66,5 12 3-7 1,5 31 3-7 21.5 1.5 66.5 39.5 3-7 30 68 CLIP top 110° FURNITURE HINGES motion code Blum code cup mounting with BLUMOTION screw EXPANDO INSERTA with spring screw EXPANDO INSERTA without spring screw INSERTA motion code Blum code cup mounting with BLUMOTION screw EXPANDO INSERTA with spring screw EXPANDO INSERTA without spring screw EXPANDO INSERTA Full overlay motion code Blum code cup mounting with BLUMOTION screw EXPANDO INSERTA with spring screw EXPANDO INSERTA without spring screw INSERTA • drilling depth for a cup 13 mm • cup diameter 35 mm, hinge arm length 66.5–68 mm • 110° opening angle • door thickness from 16 to 26 mm • option to offset the cup 3 to 7 mm from the edge • drilling a hole for Expando (Inserta) 45/9.5 mm pitch / 8 mm diameter; use Ecodrill for assembly p. 01.39 • for further information, see the Blum catalogue Half overlay Inset
01.24 12345 12345 01 12042 70T3504 12093 70.1503 12011 70.1663 14144 174E6102.03 12196 80.0582E 12198 621.1300 12039 70T3553 268987 70T3507.21 13681 660.0950 12042 12093 12011 12039 268987 13681 12198 14144 min. 86 67 3-7 9 19 RS 37 16,5 0,7 21 min. 70 33,5 21,5 F 8 3-7 51 203405 79B9950 12083 79T9950 118122 79B9550 13070 79T9550 12079 79T958E 166071 78T9550.TL FURNITURE HINGES CLIP top 110° Item in stock Item on demand code Blum code description cup cover cap arm cover cap for full overlay hinge arm cover cap for half overlay and inset hinges dowel EXPANDO T 5 mm dowel EXPANDO T 8 mm screw for dowel EXPANDO 8 mm 86° opening angle stop distance plate for the hinge cup screw for a wide aluminium frame Accessories motion code Blum code cup mounting with BLUMOTION screw with spring screw motion code Blum code cup mounting with BLUMOTION screw with spring screw EXPANDO TIP-ON screw • hinges with and without soft closing cannot be combined • the mounting plate for a full overlay hinge is determined by the thickness of the cabinet body material • drilling depth for a cup 13 mm (12.3 mm without soft closing) • cup diameter 35 mm • minimum inner dimension of blind corner, door 70 mm (inset), 86 mm (full overlay) • 95° opening angle • door thickness from 16 to 28 mm • option to offset the cup 3 to 7 mm from the edge • drilling a hole for EXPANDO 45 / 9.5 mm pitch / 8 mm diameter • for further information, see the Blum catalogue • the plate for inset hinges should be raised by 3 mm – e.g. 12341, 12303 gap Full overlay for blind angle Inset for blind angle 01 02 03 04 05 06 08 10 11 14 13 12 09 07
01.25 www.demos‑trade.com 347988 71B453T 347989 71T453T 347990 70T453T 347984 70.4503 347986 70T4504 347982 70T4503 347981 70T4503.09 max. 56,5 1,5 F 3,5 23,5-46 1,5 75,5 F 1,5 3,5 23,5-25,5 77 max. 56,5 BT = min. 6 F 1,5 3,5 23,5-46 1,5 75,5 max. 56,5 B = FA + 27 mm FA B 3,5 Ø10 32,5 32 44 CLIP top for thin doors FURNITURE HINGES motion code Blum code cup mounting with BLUMOTION EXPANDO T with spring EXPANDO T without spring EXPANDO T Hinges for thin materials • hinge for door thickness 8–14 mm • EXPANDO T mounting system for the most diverse board materials • CLIP top BLUMOTION with integrated BLUMOTION (with deactivation) • CLIP top with a closing mechanism (spring) or without it (TIP-ON) • zero protrusion (for inner or shelf pull-outs) • installation without tools on a mounting plate • front adjustment in 3 directions Different installation configurations are achieved according to the respective screw-on position. code Blum code description arm cover cap cup cover cap opening angle stop to 85° opening angle stop to 92° Ĺ recommended plates: 203387, 211476, 12323, 12326, 12306, 12318, 12340, 12302, p. 01.37 110° for thin doors Accessories Hinge cup
01.26 12345 12345 01 12002 71M2550 12050 71M258E 177364 70M2550.TL 12005 71M2650 12051 71M268E 224239 70M2650.TL 12008 71M2750 12007 71M278E 224240 70M2750.TL H H H D 9 12,6 16 - 24 100° 12,6 16 - 24 18,5 100° 3 - 6 (K) D D 12,6 16 - 24 100° 27 +/- 2 mm +3/-2 mm +/- 2 mm +3/-2 mm +/- 2 mm +3/-2 mm H H D 9 12,6 16 - 24 100° 12,6 16 - 24 18,5 100° 3 - 6 (K) D 12,6 16 - 24 +/- 2 mm +3/-2 mm +/ +/- 2 mm +3/-2 mm H H 12,6 16 - 24 18,5 100° 3 - 6 (K) D D 12,6 16 - 24 3 - 6 (K) 100° 27 +/- 2 mm +3/-2 mm +/- 2 mm +3/-2 mm 12391 973A0500 12385 973A0600 12386 973A0700 12271 90M2503 FURNITURE HINGES CLIP top 100° Item in stock Item on demand motion code Blum code cup mounting with spring screw EXPANDO without spring screw motion code Blum code cup mounting with spring screw EXPANDO without spring screw motion code Blum code cup mounting with spring screw EXPANDO without spring screw Full overlay Half overlay Inset code Blum code description Clip-on Blumotion for a full overlay hinge Clip-on Blumotion for a half overlay hinge Clip-on Blumotion for an inset hinge arm cover cap for full overlay hinge Dampers and cover caps CLIP top 100° 01 02 03 04 05 06 08 10 11 14 13 12 09 07
01.27 www.demos‑trade.com 118030 71B9550 12060 71T9550 177383 70T9550.T 118031 71B9650 12063 71T9650 118032 71B9750 12042 70T3504 12058 70T1504 12094 70.1553 12011 70.1663 268987 70T3507.21 22 66 1,5 14,5 3-7 67,5 32,5 40 3-7 31 66 1,5 24 3-7 CLIP top 95°, for thick door FURNITURE HINGES • drilling depth for a cup 13 mm • cup diameter 35 mm, arm length 66 mm • 95° opening angle screw • door thickness up to 32 mm • offset of the cup 3 to 7 mm from the edge motion code Blum code cup mounting with BLUMOTION screw with spring screw without spring screw motion code Blum code cup mounting with BLUMOTION screw with spring screw motion code Blum code cup mounting with BLUMOTION screw Ĺ recommended plates: 203387, 211476, 12323, 12326, 12306, 12318, 12340, 12302, p. 01.37 n offset the plate screwing position by the thickness of the door + 1.5 mm Full overlay Inset Half overlay code Blum code description cup cover cap for hinges with soft closing cup cover cap for hinges without soft closing arm cover cap for full overlay hinge arm cover cap for half overlay and inset hinges distance plate for the hinge cup Cover caps
01.28 12345 12345 01 347923 71B7550 347925 71B7590 347929 71T7550 347931 71T7590 347953 70T7550.TL 347955 70T7590.TL 347947 71B7550D 347926 71B7650 347932 71T7650 347938 70T7650.TL 347984 70.4503 347961 70T7504 347956 70T7553 347957 70T553.09 72,5 3-8 2,3 max. 61 73,5 3-8 1,7 max. 62 72,5 3-8 7,2 max. 71 FURNITURE HINGES CLIP top with opening angle 155° and 125° Item in stock Item on demand motion code Blum code cup mounting with BLUMOTION screw with spring screw without spring screw motion code Blum code cup mounting with BLUMOTION screw INSERTA with spring screw INSERTA without spring screw INSERTA motion code Blum code cup mounting with BLUMOTION screw • offset the plate screwing position by the thickness of the door + 1.5 mm code Blum code description arm cover cap cup cover cap for 155° 110° opening angle stop 92° opening angle stop Ĺ recommended plates: 203387, 211476, 12323, 12326, 12306, 12318, 12340, 12302, p. 01.45 Max. front overlay Full overlay, zero protrusion 155° Full overlay, zero protrusion 125° Half overlay, zero protrusion 155° Cover caps and opening angle stops 01 02 03 04 05 06 08 10 11 14 13 12 09 07
01.29 www.demos‑trade.com 1 2 21 14 37 65 24 40 68 14 13041 71T6550 179411 71T658E 12044 71T6540B 177379 70T6550.TL 12112 79T8500 12113 79T853E 12273 80.6507 12384 973A6000 12093 70.1503 12393 970.1002 12045 71T6650 60° max. 65 8 11 F 3-8 1,5 69 max. 84 3-8 7,5 26,5 70,5 T F T+37 CLIP top 170°, corner application FURNITURE HINGES • inset door option – 12045 + plate raised by 9 mm (e.g. 12332) • for door thickness 15–23 mm • in combination with hinges 155° or 170° • 60° opening angle n Offset the plate screwing position by the thickness of the door + 1.5 mm. n Factory setting of hinge overlay for 19 mm door thickness. n Door overlay for door thickness 19 mm when using standard mounting plates, raised by 3 mm. n The hinge cup of the folding door should be fixed to the same door as the cup of the 170° and 155° hinge. motion code Blum code cup mounting with spring screw EXPANDO INSERTA without spring screw motion code Blum code cup mounting with spring screw EXPANDO code Blum code description arm cover cap for 170° clip-on damper for 170° code Blum code description arm cover cap, without logo BLUMOTION for drilling-in (handle site) Ĺ recommended plates: 203387, 211476, 12323, 12326, 12306, 12318, 12340, 12302, p. 01.37 Full overlay Hinge for folding doors Accessories Half overlay motion code Blum code cup mounting with spring screw
01.30 12345 12345 01 118033 71B950A 118120 71B960A 118121 71B970A 12106 71T950A 12103 71T950AB 12109 70T950A.TL 12107 71T960A 12108 71T970A 13764 72T550A.TL 12094 70.1553 12011 70.1663 FURNITURE HINGES CLIP top for aluminium frames Item in stock Item on demand motion code Blum code cup mounting with BLUMOTION screw motion code Blum code cup mounting with BLUMOTION screw motion code Blum code cup mounting with BLUMOTION screw motion code Blum code cup mounting with spring screw with spring, for Blumotion 1] screw without spring screw motion code Blum code cup mounting with spring screw motion code Blum code cup mounting with spring screw 1] 12391 clip-on BLUMOTION 1] 12385 clip-on BLUMOTION • offset the plate screwing position by the thickness of the door + 2.5 mm motion code Blum code cup mounting without spring screw Ĺ recommended plates: 203387, 211476, 12323, 12326, 12306, 12318, 12340, 12302, p. 01.37 code Blum code description arm cover cap for full overlay hinge arm cover cap for half overlay and inset hinges Full overlay Full overlay Inset Inset Full overlay 120° (for Aventos HF) Cover caps Half overlay Half overlay 01 02 03 04 05 06 08 10 11 14 13 12 09 07
01.31 www.demos‑trade.com 12085 12090 12087 12092 2,5 ø31 8,2 12080 75T4100 12082 75T4300 12081 75T4200 12085 84.4120 12087 84.4120 12090 84.4140 12092 84.4140 12094 70.1553 4,5 - 7 5,5 95° H D 95° 23,5 D H 4,5 - 7 4,5-7 15 H 95° D CLIP top for glass doors FURNITURE HINGES • screws provided with the hinge • cup drilling diameter 26 mm • arm length 66 mm, inset 68 mm • cover caps diameter 31 mm, length of oval one 41 mm • 94° opening angle • for drilled glass doors, thickness 4.5–7 mm • option to offset the cup 6 to 7 mm from the edge • for more information, see the Blum catalogue, available after registration at www.katalog-blum.cz, or in the brochure available for download at www.blum.com motion code Blum code cup mounting with spring screw motion code Blum code cup mounting with spring screw motion code Blum code cup mounting with spring screw code Blum code description D shape, chrome D shape, matt nickel O shape, chrome O shape, matt nickel Ĺ recommended plates: 203387, 211476, 12323, 12326, 12306, 12318, 12340, 12302, p. 01.37 Ĺ recommended plates: 203387, 211476, 12323, 12326, 12306, 12318, 12340, 12302, p. 01.37 Ĺ recommended plates: 203387, 211476, 12323, 12326, 12306, 12318, 12340, 12302, p. 01.37 code Blum code description printable Full overlay Inset Arm cover cap Cover cup with counterpart Half overlay
01.32 12345 12345 01 347963 71B4500C 347964 71T4500C 347965 70T4500CTL 347966 70T4568C 347967 70T4568C 347983 70.4503.BP 347984 70.4503 347986 70T4504 347981 70T4503.09 347982 70T4503 12049 71B3750 347968 175M4C20N 347968 175M4C20N FURNITURE HINGES CLIP top CRISTALLO 110° Item in stock Item on demand motion code Blum code with BLUMOTION with spring without spring code Blum code cup mounting for gluing on glass for gluing on mirror motion code Blum code mounting with BLUMOTION screw mounting plate for gluing on the mirror Hinge for glass and mirror doors • fixing the hinge cup to glass (mirror) by gluing without drilling into glass • the different overlay can be achieved through relevant cup adhesion positions • 110° opening angle • the correct gluing procedure will be recommended by the glass or mirror supplier • for more information, see the Blum catalogue, available after registration at www.katalog-blum.cz, or in the brochure available for download at www.blum.com code Blum code description arm cover cap, with logo arm cover cap cup cover cap opening angle stop, 92° opening angle stop, 85° Ĺ photo accessories can be found on the web code Blum code description for gluing on glass cabinet body Hinge arm Hinge plate Cabinets with overlapping fronts for bathrooms Cover caps and opening angle stops Hinge cup 01 02 03 04 05 06 08 10 11 14 13 12 09 07
01.33 www.demos‑trade.com 306317 71B3550 497115 70T3550 306319 71B3750 306318 71B3650 306327 79B9550 347941 71B7550 347943 71B7590 347945 70T7550.TL 347946 70T7590.TL 347096 75B1550 21,5 66,5 12 3-7 1,5 21,5 66,5 12 3-7 1,5 31 3-7 21.5 1.5 66.5 39.5 3-7 30 68 72,5 3-8 2,3 max. 61 21 min. 70 33,5 21,5 51 CLIP top ONYX FURNITURE HINGES motion code Blum code cup mounting with BLUMOTION screw motion code Blum code cup mounting with BLUMOTION screw INSERTA without spring screw INSERTA motion code Blum code cup mounting with BLUMOTION screw without spring screw motion code Blum code cup mounting with BLUMOTION screw motion code Blum code cup mounting with BLUMOTION screw motion code Blum code cup mounting with BLUMOTION screw Full overlay 110° Blind corner 95° – inset Full overlay 107° Inset 110° Half overlay 110° 155° with BLUMOTION – full overlay
01.34 12345 12345 01 306329 71T950A 497120 79T950A 347969 71B4500C 318173 70T9550 306320 175H3100 347124 174H7100E 347125 174H7130E 497104 177H130E 497123 79T8500 306321 70.1503 306322 70T3504 306326 70.1553 309046 × 306320 347124 22 66 1,5 14,5 3-7 21 14 37 65 FURNITURE HINGES CLIP top ONYX Item in stock Item on demand motion code Blum code cup mounting with spring screw without spring screw Full overlay – aluminium frame CRISTALLO full overlay motion code Blum code cup mounting with BLUMOTION for gluing on glass motion code Blum code cup mounting without spring screw Full overlay for thick doors Straight and cruciform plates height code Blum code cup mounting 8.5 mm screw 8.5 mm EXPANDO 11.5 mm EXPANDO 11.5 mm EXPANDO Folding doors Accessories description code Blum code colour with spring screw code Blum code description colour arm cover cap, without logo ONYX cup cover cap with Blumotion ONYX arm cover cap, without logo ONYX screw 3.5 × 16 mm PZ2 black zinc Ĺ accessories for TIP-ON p. 00136 01 02 03 04 05 06 08 10 11 14 13 12 09 07
01.35 www.demos‑trade.com 226668 70T3550.TL 110° 226669 70T358E.TL 110° 177369 70T3590.TL 110° 177364 70M2550.TL 100° 12023 70T5550.T 120° 12028 70T558E.T 120° 177379 70T6550.TL 170° 177383 70T9550.TL 95° 347953 70T7550.TL 155° 347955 70T7590.TL 155° 318173 70T9550.TL ONYX 95° 226670 70T3650.TL 177372 70T3690.TL 224239 70M2650.TL 347938 70T7650.TL 226671 70T3750.TL 110° 177374 70T3790.TL 110° 224240 70M2750.TL 100° 166071 78T9550.TL 95° 12109 70T950A.TL 95° 13764 72T550A.TL 120° 347990 70T453T 110° EXPANDO T 347965 70T4500CTL 110° TIP-ON FURNITURE HINGES Ĺ for mounting plates, see p. 01.37 code Blum code description opening angle cup mounting screw EXPANDO INSERTA screw screw EXPANDO screw thick door screw zero protrusion screw zero protrusion INSERTA screw code Blum code opening angle cup mounting 110° screw 110° INSERTA 100° screw 155° screw code Blum code description opening angle cup mounting screw INSERTA screw blind corner1) screw code Blum code opening angle cup mounting screw screw code Blum code opening angle cup mounting code Blum code opening angle cup mounting gluing 1] mounting plate raised by 3 mm – see p. 01.37 Full overlay without spring ALUMINIUM frames – full overlay Thin material Glass Inset, unsprung Half overlay, unsprung
01.36 12345 12345 01 250826 956.1004 250827 956.1004 497006 956.1004 250831 956A1004 250833 956A1004 497007 956A1004 308497 956A1006 250836 956A1006 497008 956A1006 341755 955.1008D 225140 955.1008S 348000 955.1008 250838 956.1201 250839 956.1201 497009 956.1201 250841 956A1201 250842 956A1201 497010 956A1201 250844 956A1501 341755 225140 348000 Ø15 76 76 1 min. 1,5 3,1 2,6-3,2 10 0,5 18 Ø11,5 1,1 Ø5 3 = = 13 FURNITURE HINGES TIP-ON Item in stock Item on demand • TIP-ON pins for handleless fronts open after a slight push • they are used in combination with Blum spring-free hinges • the pins are also designed for TIP-ON versions of AVENTOS • colour-matched adapters for easy and fast assembly on the side of the cabinet body • two pin lengths to which suitable adapters are designed • it can be aligned with the rest of the fronts by rotating the ejector thanks to adjustment feature (+ 4 / − 1 mm), which is integrated into the pin code Blum code description colour (material) 50 mm, magnet white 50 mm, magnet grey 50 mm, magnet carbon black 76 mm, magnet white 76 mm, magnet grey 76 mm, magnet carbon black 76 mm, buffer white 76 mm, buffer grey 76 mm, buffer carbon black code Blum code description colour (material) TIP-ON plate for knock-in nickel TIP-ON plate for screwing-on nickel TIP-ON plate for gluing-on steel code Blum code description colour (material) 50 mm, inline white 50 mm, inline grey 50 mm, inline carbon black 76 mm, inline white 76 mm, inline grey 76 mm, inline carbon black 76 mm, cruciform grey Pistons for hinges Accessories Adapters for pistons 01 02 03 04 05 06 08 10 11 14 13 12 09 07
01.37 www.demos‑trade.com 12170 171A5010 12171 171A5040 12172 171A5070 12173 171A5500 347999 70T4532T 12306 173L6100 12318 173L8100 12302 174E6100.01 203387 175H3100 211476 177H3100E 12340 173H7100 12312 174H7100E 12316 174H7100I 12170 347999 12171 12172 12173 12312 12304 173L6130 12305 173L8130 12303 174E6130.01 12341 173H7130 288360 177H3130E 12319 175H9160 12332 175H7190 12335 175H9190 12311 175H7190.22 12336 175H9190.22 32 37 32 20 Expando Ø5 CLIP top and CLIP mounting plates FURNITURE HINGES description code Blum code cup mounting cruciform screw euro screw EXPANDO horizontal screw EXPANDO cruciform with cam screw EXPANDO INSERTA code Blum code description + 5°, height: 0.8 mm + 5°, height: 3 mm + 5°, height: 6 mm − 5°, height: 6 mm dowel, EXPANDO T • EXPANDO T dowel is without a screw – 92598T − M4 × 8 – 362259 − M4 × 12 Basic mounting plates Raised plates, cruciform with cam Plates raised by 3 mm Spacers for changing the angle of the hinge overlay, dowel description code Blum code cup mounting cruciform screw euro screw EXPANDO cruciform with cam screw horizontal cam mounting plate EXPANDO description code Blum code cup mounting ø 6 mm euro screw ø 9 mm screw euro screw ø 18 mm screw euro screw
01.38 12345 12345 01 12398 970A1002 12393 970.1002 12392 971A0500 12394 970.1201 12395 970.1501 12396 970.2501 12391 12385 12384 12398 12395 12396 12394 12392 12386 12384 973A6000 1] 12391 973A0500.011] 12385 973A0600 2] 12386 973A0700 3] 50 min. 1,5 Ø 10 FURNITURE HINGES external BLUMOTION Item in stock Item on demand 1]BLUMOTION for hinges 13041, 179411 and 12044 code Blum code description hinge side handle side code Blum code code Blum code code Blum code 1] BLUMOTION for hinges 12002, 12050 and 12004 2] BLUMOTION for hinges 12005, 12051 and 12006 3] BLUMOTION for hinges 12008, 12007 and 12010 code Blum code For drilling-in Clip-on With adapter between the hinges Clip-on Adapters 01 02 03 04 05 06 08 10 11 14 13 12 09 07
www.demos-trade.comRkJQdWJsaXNoZXIy MzEyMDA=