www.demos‑trade.com 01.65 50° 65° F - 3 mm, + 0,5 mm 5 mm 37 50° 65° 5 41 F - 3 mm, + 0,5 mm 5 mm 4 mm Sensys 165°, TH52 (52 × 5,5) FURNITURE HINGES Option A – holes for cups in one door • enables optimisation of the gap between the leaves to a minimum • cup distance C is identical on both sides of the door • both leaves may be equally wide • space between the holes for the plate on the loose leaf is 37 mm • for door thickness 16–21 mm Calculation of door width: • hole clearance for the door including the cabinet body body side − gap F − door thickness Recommended height of the mounting plate1] • C = 4.5 mm: height of the plate D = 0 • C = 3.0 mm: height of the plate D = 1.5 1] different drilling C can be compensated by in-depth and diagonal adjustment Drawing – option A Drawing – option B Option B – holes for cups in both doors • gap between leaves 5 mm • cup distance C identical for both doors • both leaves may be equally wide • space between the holes for the plate on the leaf is 41 mm • for door thickness 16–21 mm Calculation of door width: • hole clearance for the door including the cabinet body side − gap F − door thickness − 5 Recommended height of the mounting plate1] • C = 4.5 mm: height of the plate D = 0 • C = 3.0 mm: height of the plate D = 1.5 hinge, e.g. with great opening angle Intermat 9956 hinge, e.g. with great opening angle Sensys diagonal adjustment diagonal adjustment depth adjustment depth adjustment adjustment of overlay 4 mm adjustment of the overlay gap F gap F “free” door “free” door middle door minimum gap middle gap gap gap
RkJQdWJsaXNoZXIy MzEyMDA=