10.95 www.demos-trade.fr min. 15 2 1 2 3 min. 15 2 1 2 3 min. 15 LIBRA H1 PAT. PENDING LIBRA is the innovative family of CABINET HANGERS and WALL PLATES especially conceived to satisfy all the customer's needs. The LIBRA hangers are to be installed behind the rear panel with the only small cover caps left visible inside the cabinet. LIBRA is a very resistant and reliable solution as the zinc-coated steel body is sensibly thicker, and therefore stronger. All the models within the LIBRA family feature an innovative ANTI-TURNOVER device which is covered by patent. LIBRA H1 is the universal screw fixing cabinet hanger. Also featured in the LIBRA family are 5 types of wall plates and 1 types of wall bars made of very thick zinc-coated steel and hardened by punched impressions. Wall bars and wall plates feature oval holes which facilitate the correct positioning and give the possibility to carry out the horizontal adjustment. Placement of the holes for wall-fixation has been optimised to reduce the stress on the plates and on the plugs. LIBRA cabinet hangers allow to adjust the cabinet vertically and horizontally. The 2 movements are 100% INDEPENDENT of each other and therefore make the adjustments much easier and more efficient. The adjustment and the locking of the ANTI-TURNOVER bolt can be carried out from the inside of the cabinet by using a standard PZ2 screwdriver. Capacity Loading 75 Kilos per piece in accordance with the regulation DIN 68840 Steel, Zinc alloy and Engineering plastic according to related version. Part. no 63420010ZN Description Cabinet hanger Libra H1 For wall plates and cover caps see the related pages. 12 18,5 15 min. 31 42 DRILLING PLAN FOR CABINET HANGER FIXED UNDER THE CABINET TOP OTHER APPLICATIONS FOR CABINET HANGER NOT FIXED TO THE TOP recommended fixing screws Ø3,5x20 recommended fixing screws Ø3,5x20 recommended fixing screws Ø3,5x20 16-21 Drilling plan for Libra CC1 cover cap Drilling plan for Libra CC2 cover cap 40 24,5 Ø30 18,5 15 min. min. 15 12 18,5 15 min. 54,5 42,5 25 31 2 1 2 3 min. 15 361269 FERRURES D'ASSEMBLAGE ferrures de suspension réglables pour éléments hauts • ferrure de suspension réglable droite-gauche • fixation à l'aide d'un serre-joint excentrique et de vis • vis de sécurité contre le décrochage du meuble du profil de suspension selon la norme EN14749 • capacité de charge 130 kg / paire • réglage en hauteur 13 mm ; en profondeur 12 mm ; latéral env. 30 mm (par déplacement sur la plaque de suspension fournie) • pour une profondeur de caisson jusqu'à 350 mm (éléments hauts) • pour la suspension au mur, on peut également utiliser le profil 352537 Le kit comprend : – deux pièces de ferrure de suspension et caches – gabarit de montage – plaque de suspension – vis pour caisson 1 – réglage en hauteur 2 – réglage du décalage du mur 3 – sécurité contre le décrochage perçage des trous pour le réglage Mise en place de la ferrure vis de fixation recommandées Ø 3,5 × 20 Ferrure de suspension Libra H1 avec sécurité code description kit pour un meuble (y compris gabarit)
RkJQdWJsaXNoZXIy MzEyMDA=