10.76 12345 12345 10 min. 15 2 1 2 3 min. 15 2 1 2 3 min. 15 LIBRA H1 PAT. PENDING LIBRA is the innovative family of CABINET HANGERS and WALL PLATES especially conceived to satisfy all the customer's needs. The LIBRA hangers are to be installed behind the rear panel with the only small cover caps left visible inside the cabinet. LIBRA is a very resistant and reliable solution as the zinc-coated steel body is sensibly thicker, and therefore stronger. All the models within the LIBRA family feature an innovative ANTI-TURNOVER device which is covered by patent. LIBRA H1 is the universal screw fixing cabinet hanger. Also featured in the LIBRA family are 5 types of wall plates and 1 types of wall bars made of very thick zinc-coated steel and hardened by punched impressions. Wall bars and wall plates feature oval holes which facilitate the correct positioning and give the possibility to carry out the horizontal adjustment. Placement of the holes for wall-fixation has been optimised to reduce the stress on the plates and on the plugs. LIBRA cabinet hangers allow to adjust the cabinet vertically and horizontally. The 2 movements are 100% INDEPENDENT of each other and therefore make the adjustments much easier and more efficient. The adjustment and the locking of the ANTI-TURNOVER bolt can be carried out from the inside of the cabinet by using a standard PZ2 screwdriver. Capacity Loading 75 Kilos per piece in accordance with the regulation DIN 68840 Steel, Zinc alloy and Engineering plastic according to related version. Part. no 63420010ZN Description Cabinet hanger Libra H1 For wall plates and cover caps see the related pages. 12 18,5 15 min. 31 42 DRILLING PLAN FOR CABINET HANGER FIXED UNDER THE CABINET TOP OTHER APPLICATIONS FOR CABINET HANGER NOT FIXED TO THE TOP recommended fixing screws Ø3,5x20 recommended fixing screws Ø3,5x20 recommended fixing screws Ø3,5x20 16-21 Drilling plan for Libra CC1 cover cap Drilling plan for Libra CC2 cover cap 40 24,5 Ø30 18,5 15 min. min. 15 12 18,5 15 min. 54,5 42,5 25 31 2 15 361269 TECNOLOGIA DE CONEXÃO E GRELHAS DE VENTILAÇÃO Artigo em stock Artigo sob encomenda • ferragem de suspensão com regulação esquerda-direita • bloqueio por meio de grampo excêntrico e parafusos • parafuso de segurança contra o desencaixe do armário do perfil de suspensão conforme a norma EN14749 • capacidade de carga 130 kg / par • regulação de altura 13 mm; profundidade 12 mm; lateral aprox. 30 mm (por deslocamento na chapa de suspensão fornecida) • para profundidade do corpo até 350 mm (armários superiores) • para suspensão na parede pode ser utilizada também a calha 352537 O conjunto contém: – duas peças de ferragem de suspensão e tampas – gabarito de montagem – chapa de suspensão – parafusos para o corpo 1 – regulação em altura 2 – regulação do afastamento da parede 3 – segurança contra desencaixe furação de orifícios para regulação Posicionamento da ferragem parafusos de fixação recomendados Ø 3,5 × 20 Ferragem de suspensão Libra H1 com bloqueio código descrição conjunto para um armário (incluindo gabarito) ferragem de suspensão com regulação para armários superiores 01 02 03 04 05 06 08 10 11 14 13 12 09 07
RkJQdWJsaXNoZXIy MzEyMDA=