10.77 www.demos‑trade.com LIBRA H2 Part. no PAT. PENDING LIBRA is the innovative family of CABINET HANGERS and WALL PLATES especially conceived to satisfy all the customer's needs. The LIBRA hangers are to be installed behind the rear panel with the only small cover caps left visible inside the cabinet. LIBRA is a very resistant and reliable solution as the zinc-coated steel body is sensibly thicker, and therefore stronger. All the models within the LIBRA family feature an innovative ANTI-TURNOVER device which is covered by patent. LIBRA H2 is the universal cabinet hanger 3 dowels + rotary lever. Also featured in the LIBRA family are 5 types of wall plates and 1 types of wall bars made of very thick zinc-coated steel and hardened by punched impressions. Wall bars and wall plates feature oval holes which facilitate the correct positioning and give the possibility to carry out the horizontal adjustment. Placement of the holes for wall-fixation has been optimised to reduce the stress on the plates and on the plugs. LIBRA cabinet hangers allow to adjust the cabinet vertically and horizontally. The 2 movements are 100% INDEPENDENT of each other and therefore make the adjustments much easier and more efficient. The adjustment and the locking of the ANTI-TURNOVER bolt can be carried out from the inside of the cabinet by using a standard PZ2 screwdriver. Capacity Loading 75 Kilos per piece in accordance with the regulation DIN 68840 Steel, Zinc alloy and Engineering plastic according to related version. 63420020ZN Description Cabinet hanger Libra H2 4 holes Ø10 5 13 12 37 32 32 32 19,5 15 min. 40 42 DRILLING PLAN FOR CABINET HANGER FIXED UNDER THE CABINET TOP OTHER APPLICATIONS FOR CABINET HANGER NOT FIXED TO THE TOP recommended fixing screws Ø3,5x20 recommended fixing screws Ø3,5x20 recommended fixing screws Ø3,5x20 16-21 13 37 32 32 32 19,5 15 min. 49 24,5 Ø30 Drilling plan for Libra CC1 cover cap Drilling plan for Libra CC2 cover cap For wall plates and cover caps see the related pages. 2 1 2 3 2 1 2 3 1 2 3 4 × Ø10 37 32 32 32 5 15 min. 15 min. 13 19,5 ø30 49 24 15 min. 19,5 13 12 54,5 42,5 34 40 2 134959 134963 160564 227087 ACCESORII PENTRU ÎMBINĂRI, GRILE ȘI VENTILAȚII • accesoriu de agățare cu reglaj stânga-dreapta • asigurare cu ajutorul dispozitivului de strângere excentric și al șuruburilor • șurub de siguranță împotriva desprinderii corpului de pe profilul de suspendare conform normei EN14749 • capacitate de încărcare 150 kg / pereche • spatele trebuie inserat la 16 mm de la marginea posterioară a corpului • reglaj pe înălțime 13 mm, pe adâncime 12 mm • pentru adâncimea corpului de până la 350 mm (corpuri suspendate) • pentru găurire 30 mm 1 – reglaj pe înălțime 2 – reglaj al decalajului de la perete 3 – siguranță împotriva scoaterii accidentale Găurirea orificiilor pentru reglaj Poziționarea accesoriului șuruburi de fixare recomandate Ø 3,5 × 20 Sistem de agățare Libra H2 cu asigurare Ĺ profil de suspendare recomandat 352537, eventual plăci de suspendare 134964 sau 134965 Capace cod descriere stânga-dreapta cod tip culoare lat alb gri îngust nichel sistem de agățare cu reglaj pentru corpuri suspendate
RkJQdWJsaXNoZXIy MzEyMDA=