06.13 www.demos‑trade.com 406053 406054 406055 535091 5 5 544598 ±3000 K 2100 lm/m 160 8 mm 12 W 507813 507815 544701 ±4000 K 2280 lm/m 160 8 mm 12 W 507813 507815 544702 ±6500 K 2180 lm/m 160 8 mm 12 W 507813 507815 544704 ±4000 K 3700 lm/m 240 10 mm 20 W 507814 507816 8 16 LIGHTING AND ELECTRIFICATION OF FURNITURE StrongLumio S5 | white 24 V SMD strips with high luminous intensity YEARS YEARS WARRANTY WARRANTY code light colour temperature luminous intensity LED/m width input power/m Universal connector Corner connector warm white neutral white cold white neutral white • CRI 80+ balanced colour rendering for general use • protection rating: IP20, interior use only • 2835 diodes in segments of 8 LEDs for better energy utilisation • the intentionally lower CRI delivers even better luminous flux • segments of 8 LEDs minimise losses and allow exceptional light efficiency to be achieved (up to 190 lm/W) • 3 oz copper joints for better heat dissipation and longer service life • suitable for applications with emphasis on maximum brightness and energy efficiency 24 V, 12 W, 160 LED/m, 8 mm • manufactured by co-extrusion of LED strip and silicone • greater durability than when a strip is subsequently inserted into an empty profile • manufactured from gas-phase silicone – a high-purity material • resistant to yellowing, ageing, and weathering • adequate heat dissipation, possible to install directly into a prepared groove • pleasant matt surface without reflections • waterproof IP67 after proper sealing of end caps • suitable for damp environments as well as for direct installation into furniture • horizontal bending – sideways when light is directed upwards Neons 24 V 24 V, 20 W, 240 LED/m, 10 mm • CRI 80+ balanced colour rendering for general use • protection rating: IP20, interior use only • 2835 diodes in segments of 8 LEDs for better energy utilisation • the intentionally lower CRI delivers even better luminous flux. • segments of 8 LEDs minimise losses and allow exceptional light efficiency to be achieved (up to 190 lm/W) • 3 oz copper joints for better heat dissipation and longer service life • suitable for applications with emphasis on maximum brightness and energy efficiency 160 LED/m: trimming every 50 mm / 8 diodes 240 LED/m: trimming every 33.3 mm / 8 diodes • empty profile – rounded shape • pre-installed pull cord for threading your own LED strip through • suitable for strips with a power output of up to 10 W/m due to heat dissipation • suitable for strips up to 10 mm in width, however for diodes smaller than 5050 • RGB LED strips can also be used, however their white light may result in overheating and damage • use of COB strip is recommended for straight or only slightly curved installations 8×16 mm silicone profile without LED strip code description silicone profile without LED strip end cap without hole end cap with hole aluminium clip for surface mounting
RkJQdWJsaXNoZXIy MzEyMDA=