06.26 12345 12345 06 06 535062 12/24 V 546639 12/24 V 546641 12/24 V 467133 12/24 V 469139 230 V 535067 230 V 535062 546641 467133 12/24 V, max 9 A 469139 546639 535067 LIGHTING AND ELECTRIFICATION OF FURNITURE Strong Lumio S5 | Self-powered kinetic switches Item in stock Item on demand Caution: 230 V units are intended for fixed installation. Installation must be carried out by a qualified person in accordance with applicable regulations. The choice of receiver is important with regard to the intended use. Most models are designed for single-colour lighting. All are compatible with all switches and allow use in various combinations. Some models additionally allow control via the Tuya mobile app over wifi. Simple pairing with switches using a single button. Simple wiring thanks to connectors round 5.5 mm DC connector on input – directly into power supply 6 Mini connectors on output, all controlled simultaneously max current 3 A – designed for lighter assemblies dimming option also for 230 V wifi module – supports Tuya app Control unit for two-wire CCT strips – allows regulation of white colour temperature. Requires at least a 2-button switch for brightness and temperature regulation. When a single-colour strip or single-button switch is connected, functions as a standard dimmer. Snap-in terminal block, max 2×3 A. 52 × 52 × 23 mm recommended LED strip 544705 Compact control unit with 3PIN connector. Used to control single-colour LED strips exclusively in conjunction with a 3PIN power supply (p. 6.33). LED strips are connected via Mini connectors to the power supply. Maximum switched lighting power is determined by the selected power supply. Dimensions 44 × 44 × 22 mm – suitable for installation in an electrical back box. Maximum load 500 W LED; 1 100 W other devices. In addition to kinetic switches, can also be combined with a standard wired wall switch. Does not support dimming. Suitable for example for switching a power supply or a luminaire with a built-in transformer. Overview of control units 12/24 V receiver with connectors Dimmer units with terminal blocks Receiver for 2PIN CCT strips 3PIN receiver 230 V switching relay code description voltage dimming example of use Wifi - Tuya 12/24 V unit with connectors yes LED strips in multiple branches* no 3PIN yes exclusively with 3PIN power supplies (p. 6.12) no 2PIN CCT yes 2PIN CCT LED strips no 12/24 V unit with terminal boxes yes LED strips – larger assemblies yes 230 V unit with terminal boxes yes dimmable light sources – LED bulbs yes 230 V switching relay no power supply switching no code description receiver/distributor with Mini connectors 12/24 V code description receiver for 2PIN CCT strips 12/24 V code description 230 V – suitable for dimmable LED bulbs, not designed for power supply switching code description receiver for wireless self-powered switches 12/24 V 3PIN code description switching relay for 230 V 01 02 03 04 05 06 08 10 11 14 13 12 09 07
RkJQdWJsaXNoZXIy MzEyMDA=