12345 12345 07.70 07 5 6,3×32 4 7 6 3 7 Ø6,5 x 32 X1 X1 1 2 Ø3,5 x 25 18 4 S4V0 * * h = H - 45 18 20 18 20 Era Rekord Era h = H - 40 mm hp = h - 1 mm hl = hp - 4 mm d = (D - 3 mm + Z) : N dp = d - 37 mm dpL = d - 17 mm dl = dpL - 6 mm dk = d - 57 mm Rekord 2 3 5 Era 34 68 65 102 136 Rekord 30 60 57 90 120 Mini SV-25 (14–25 kg) 318662 Mini SV-40 (25–40 kg) 283956 Mini SV-60 (40–60 kg) 351743 318663 283955 FITTINGS FOR SLIDING AND FOLDING DOORS Item in stock Item on demand H – inner hole height in mm W – inner hole width in mm N – number of doors Z – overlap width in mm Calculation table: 1] handle profile height is the same as the door height 2] door height is reduced by an additional 5 mm when using soft closers • double-sided soft closer, for the middle door; it allows opening to both sides, stops the middle door in a central position from both sides • for door weights up to 25/40 kg • Attention! Requires a reduction in door height, the overall door height must be 44 mm lower than the hole height • when using in the Single simple rail, gently grind the bottom edges of the trap so it touches the rail with its entire surface • detailed instructions on individual soft closers are available for download on the portal, identified by a code Soft-closing systems • for door weights up to 25/40/60 kg • 3 heights of trap in the package, for fine adjustment • when using the Single simple rail, gently grind the bottom edges of the trap so it touches the rail with its entire surface n Important When the door is closed for the first time, the soft closers are not activated. Close the door slowly to activate the soft closers (click). Rapid impact can damage the soft closer as the door strikes the end position without soft closing. Always demonstrate before handing the product to the customer in order to prevent possible complications. Mini SV Central SV triple doors overlap two doors overlap handle profile 1] door door height h 2] panel height 18 mm hp panel height mirror/glass 4 mm hl doors width door d panel width 18 mm dp panel width 12 mm dpL panel width mirror/glass 4 mm dl bottom angle bracket length dk handle number of doors – N 4 (two doors overlap) 4 (triple doors overlap) overlap width in mm – Z description code description code Central SV-25 (double-sided) up to 25 kg Central SV-40 (double-sided) up to 40 kg Simple Blue system for built-in sliding cabinets – 18 mm thick panel 01 02 03 04 05 06 08 10 11 14 13 12 09 07
RkJQdWJsaXNoZXIy MzEyMDA=