07.73 www.demos‑trade.com 1 2 5 A 10,5 9 5 Ø35 11,5 Ø35 11,5 <1200 X X X X X Y X Y Y Y Y >1200 ==== ====== X = Y X = Y 1 2 1120 2250 12 1120 10 Ø35 10 Ø35 10 a b 1120 2250 12 1120 10 Ø35 10 Ø35 10 351707 2250 351706 475044 2 248 FITTINGS FOR SLIDING AND FOLDING DOORS door reinforcements • panel infill: min. 18 mm • maximum pitch: 2 250 mm • one piece is sufficient for width of up to 750 mm, 2 pcs for wider doors • in case of excessively wide doors, it is advisable to use straighteners also in the horizontal direction • prevents the bending of sliding doors with bottom guide; we recommend to use it for all doors with above-standard height or width or for doors with a glued mirror, etc. • solution with threaded bars allows shortening to any pitch • 4 clips are included in the set for better fixation of the bar in the cut-out Use If the door is in the position 1 , screw the nut “P” in the direction a , or conversely, if the door is in position 2 . tighten in the opposite direction (direction b ) After milling the grooves and cups deepening, cut threaded bars and cover caps for threaded bars. Slide cover caps on threaded bars and insert into grooves. The central cover cap has a dilatation area 5 mm on each side. Secure cover caps with attached clips. Instructions available for download on the portal. • high-quality brace preventing tall door doors from bending • metal cups, high strength, plastic cover of draw bars • one piece is sufficient for width of up to 750 mm, 2 pcs for wider doors • can be cut by up to 210 mm on each side StrongLine Installation Terno • set of two complete reinforcements code colour hinge pitch (mm) white black code hinge pitch A (mm)
RkJQdWJsaXNoZXIy MzEyMDA=