07.127 www.demos‑trade.com Fix 1 2 3 29 -32 15,5 11-14 25-50 fix 37-60 L L P P L fix fix fix D P > 75 mm 400 < L < 1350 mm L = (2 x P) + D 3 L 355892 FITTINGS FOR SLIDING AND FOLDING DOORS StrongLine smooth opening set top guide 25–50 mm positioning of bottom elements fix – fixed door bottom view D – hole width L – door width P – door overlap Assembly manual: 1. fasten the fittings on the individual doors, 2. install a fixed door, 3. install a middle door, 4. thread the cable through the fastening element, Fig. 1, 5. pull the cable around the pulleys so that the free ends are at the fixed door and the fastening element 2 is on the third door, 6. thread the loose ends of the cable through the fastening element, Fig. 2 (on the fixed door), and fasten slightly, 7. install the third door, attach the fastening element to it, Fig. 3, 8. adjust and tighten, cut off the remaining part of the cable, 9. tighten the cable using an adjustment screw on the middle door, loosen the cable on the fastening element in order to adjust the mutual position of the doors, 10. on the third door, it is possible to install soft closers in the outer positions, the remaining sets must be without soft closing. ball bearings load 80 kg • by pulling the outer door, the middle door moves smoothly • it is possible to install with any set meeting the following conditions: – distance between the door and guide 29–32 mm – distance between doors 37–60 mm (axes of individual doors) • guide profiles and fitting sets are not included in the system, must be purchased separately Fittings for smooth gradual opening of door code description complete set
RkJQdWJsaXNoZXIy MzEyMDA=