10.9 www.demos‑trade.com Ls LgV Ød1 Ødk Ls LgV Ødk Ød1 Ls LgV ødk Ød1 90° 6 × 60 360300 60 56 13,6 T30 6 × 80 360301 80 61 13,6 T30 6 × 100 / 61 360302 100 61 13,6 T30 6 × 120 / 68 360303 120 68 13,6 T30 6 × 140 / 68 360304 140 68 13,6 T30 6 × 160 / 65 360305 160 65 13,6 T30 8 × 80 360306 80 70 20,0 T40 8 × 100 / 80 360307 100 80 20,0 T40 8 × 120 / 80 360308 120 80 20,0 T40 8 × 140 / 80 360309 140 80 20,0 T40 8 × 160 / 80 360310 160 80 20,0 T40 8 × 180 / 80 360311 180 80 20,0 T40 8 × 200 / 80 360312 200 80 20,0 T40 8 × 220 / 80 360313 220 80 20,0 T40 8 × 240 / 80 360314 240 80 20,0 T40 8 × 260 / 80 360315 260 80 20,0 T40 8 × 280 / 80 360316 280 80 20,0 T40 4 × 30 405862 30 16 4,0 T20 4 × 34 405370 34 16 4,0 T20 6,0 × 50 / 32 375363 50 32 11,6 T30 6,0 × 60 / 37 375364 60 37 11,6 T30 6,0 × 70 / 41 375365 70 41 11,6 T30 6,0 × 80 / 46 375366 80 46 11,6 T30 6,0 × 90 / 61 372242 90 61 11,6 T30 6,0 × 100 / 61 372243 100 61 11,6 T30 6,0 × 120 / 68 375371 120 68 11,6 T30 8,0 × 80 / 47 375372 80 47 15,1 T40 8,0 × 100 / 57 375376 100 57 15,1 T40 8,0 × 120 / 70 375377 120 70 15,1 T40 8,0 × 140 / 80 375378 140 80 15,1 T40 8,0 × 160 / 80 375379 160 80 15,1 T40 8,0 × 180 / 80 375382 180 80 15,1 T40 8,0 × 200 / 80 375383 200 80 15,1 T40 8,0 × 220 / 80 375384 220 80 15,1 T40 screws for exterior CONNECTING FITTINGS, GRILLES AND VENTS • suitable for wooden constructions, pergolas, fastening of objects, etc. • washer head – large bearing surface for transmission of great force • 4CUT point – no pre-drilling needed (most materials 1] ) • unique point profile with a square cross section together with a corrugated thread speed up screwing and reduce the force required for screwing • from the length of 160 mm the milling section Spax 4CUT – noticeably reduces torque during tightening • much lower risk of material cracking at the edge • all that means faster and better work, longer battery life and lower bit wear • Wirox coating has 20 times higher corrosion resistance compared to conventional screws • perfectly fitting bits 1] some materials may require pre-drilling, we recommend testing it Frame screws with washer head Screw with flat head • decorative screw with flat head • for connecting two boards • head height only 1 mm and diameter 10 mm • nickel surface treatment size (d1) (mm) code total length (Ls) (mm) thread length (LgV) (mm) outer diameter of the head (dk) (mm) bit size (d1) (mm) code total length (Ls) (mm) length of the thread (LgV) (mm) outer diameter of the head (dk) (mm) bit T-STAR plus with countersunk head size (d1) (mm) code total length (Ls) (mm) length of the thread (LgV) (mm) outer diameter of the head (dk) (mm) bit • the above mentioned advantages combined with T-Star plus drive • we recommend the use of genuine T-STAR plus bits for perfect performance • working with conventional Torx bits will not allow you to take full advantage of the improved drive unique Spax screws regular screw
RkJQdWJsaXNoZXIy MzEyMDA=