06.41 www.demos‑trade.com 43 10 39,7 5–10 342513 507818 312317 28,5 10 LIGHTING AND ELECTRIFICATION OF FURNITURE StrongLumio switches for aluminium profiles Technical parameters: Voltage: 12 V/24 V Dimensions: 10 x 39.7 mm, can be narrowed to 5 mm Regulation range: 5–100% Maximum current 3.5 A Maximum switching power: 42 W (12 V), 84 W (24 V) • the lighting is switched on/off by touching the illuminated point • intensity of lighting can be set by a longer touch • memory function – remembers the intensity at the moment of the switch-off and uses the same intensity when it is switched on • flexible material – like PCB strip itself • the edges of the contact points can be cut off and the switch can be tapered as required • also suitable for narrow profiles • the possibility of using quick connectors and snap-on cables becomes a great advantage • the LED cannot be switched off – it is used to indicate the place of contact • shorten the spring as needed to touch the profile cover • in case of a too long spring, a short circuit can occur and thus cause malfunctions or damage to the switch • excessively shortened spring can be carefully extended – avoid pulling out, risk of damage, careful handling is needed • especially in the case of higher power switching, the switch must be adjacent to the aluminium profile for heat dissipation • we recommend taping with a double-sided adhesive tape 3M • lit diode cannot be turned off • the lighting is switched on/off by touching the illuminated point • intensity of lighting can be set by a longer touch • memory function – remembers the intensity at the moment of the switch-off and uses the same intensity when it is switched on Touch switch/dimmer for aluminium profiles Technical parameters: Voltage: 12 V/24 V Dimensions: 10 × 43 mm Regulation range: 0–100% Maximum current: 8 A Maximum switching power: 96 W (12 V), 192 W (24 V) code description switch/dimmer for aluminium profiles code LED indicators flexible touch switch/dimmer Flexible touch switch/dimmer for aluminium profile • lighting switches on/off by pressing the button • intensity of lighting can be set by a longer touch • memory function – remembers the intensity at the moment of the switch-off and uses the same intensity when it is switched on Switch/dimmer for aluminium profiles, mechanical Technical parameters: Voltage: 12 V DC /24 V DC Dimensions: 10 × 28.5 mm Regulation range: 0–100% Maximum current: 7.5 A Maximum switching power: 90 W (12 V), 180 W (24 V) Standby mode consumption: 0,07 W (12 V), 0.22 W (24 V) code description mechanical switch/dimmer for aluminium profiles
RkJQdWJsaXNoZXIy MzEyMDA=