06.42 12345 12345 06 06 25 10 215666 215772 392223 57 10 10 55 405195 405196 LIGHTING AND ELECTRIFICATION OF FURNITURE StrongLumio switches for aluminium profiles Item in stock Item on demand Technical parameters: Voltage: 12 V/24 V Dimensions: 10 × 25 mm Regulation range: 0–100% Max. current: 7.5 A Maximum switching power: 90 W (12 V), 180 W (24 V) Standby mode consumption: 0,1 W (12 V), 0.282 W (24 V) • capacitive sensor – touching any part of the profile will switch the lighting on/off • intensity of lighting can be set by a longer touch • memory function – remembers the intensity at the moment of the switch-off and uses the same intensity when it is switched on Switch/dimmer for aluminium profiles, touch • easy installation by soldering to a LED strip; power supply is soldered from the other end • necessary to screw to the aluminium profile with a stainless steel screw (2 mm hole) • maximum length of the control profile is 3 m, other profiles must be insulated to avoid interference with sensor function • does not work with battery and earthed power supplies • does not work on lacquered profiles (white and other) • aluminium profile must not be earthed, contact with wall may cause malfunction, must be tested in place • we recommend taping the switch with an insulating tape • slightly bend the end of the LED strip away from the aluminium profile or also tape with the insulating tape • installation instructions included, detailed instructions and installation video can be found on www.demos24plus.com code LED indicators yellow LED blue LED without LED indicator • motion sensor for profile which switches the lighting on when detecting a movement in the dark (sensor is inactive in daylight) at the detection distance (2 m – in a straight line) • sensitivity adjustable in the range of 2–60 lx • the lighting is switched on for 40 seconds (if the sensor does not detect movement after this time, the lighting switches off). Motion sensor for aluminium profile Technical parameters: Voltage: 12 V/24 V Dimensions: 10 × 57 mm, 10.5 mm hole for sensor in the cover Maximum current: 8 A Maximum switching power: 96 W (12 V), 192 W (24 V) • touch-free sensor for profile • switches the lighting on when waving in front of the sensor • detection distance: <18 cm without cover, the detection distance decreases with cover according to the filtration of IR rays • for longer shading, the lighting temperature can be adjusted • (the power ratio between the two channels changes), while the yellow LED flashes • with the second shading, the lighting intensity can be set while the blue LED flashes • when connecting one channel, it can be used as a common switch/dimmer • memory function Touch-free switch/dimmer for aluminium profile for CCT LED strips Technical parameters: Voltage: 12 V/24 V Dimensions: 10 × 55 mm Regulation range: 0–100% Maximum current: 4 A / 1 channel Maximum switching power per channel: 48 W (12 V), 96 W (24 V) code description touch-free switch / dimmer code description motion sensor for profile 01 02 03 04 05 06 08 10 11 14 13 12 09 07
RkJQdWJsaXNoZXIy MzEyMDA=